Dry Screw Vacuum pump SDV + Vacuum Booster
| Screw Type Dry Vacuum Pumping System [SDV Series] | |||||||
| Model | MKBM 890
SDV 200 |
MKBM 1680
SDV 320 |
MKBM 3370
SDV 430 |
MKBM 8200
SDV 800 |
|||
| Capacity | M3/hr | 740 | 1400 | 2800 | 6600 | ||
| Ultimate Pressure | Torr | 5 x 10-2 | 5 x 10-2 | 5 x 10-2 | 5 x 10-2 | ||
| Booster | HP | 5 | 5 | 7.5 | 15 | ||
| Vacuum Pump | HP | 5 | 10 | 15 | 20 | ||
| Starting Pressure | Torr | 40 | 20 | 20 | 20 | ||
| Inlet Connection | mm/Inch | 100/4” | 150/6” | 150/6” | 300/12” | ||
| Discharge Connection | mm/Inch | 40/1-1/2” | 50/2” | 50/2” | 65/2-1/2” | ||
| Weight | Kgs. | 850 | 1200 | 1500 | 2200 | ||
Dry Screw Vacuum pump KDP + Vacuum Booster
| Screw Type Dry Vacuum Pumping System [KDP Series] | ||||||
| Model | MKBM 890
SDV 150 |
MKBM 1680
KDP 330 |
MKBM 3370
SDV 400 |
MKBM 8200
SDV 800 |
||
| Capacity | M3/hr | 740 | 1400 | 2800 | 6600 | |
| Ultimate Pressure | Torr | 5 x 10-2 | 5 x 10-2 | 5 x 10-2 | 5 x 10-2 | |
| Booster | HP | 5 | 5 | 7.5 | 15 | |
| Vacuum Pump | HP | 7.5 | 12.5 | 20 | 30 | |
| Starting Pressure | Torr | 40 | 20 | 20 | 20 | |
| Inlet Connection | mm/Inch | 100/4” | 150/6” | 150/6” | 300/12” | |
| Discharge Connection | mm/Inch | 40/1-1/2” | 50/2” | 50/2” | 65/2-1/2” | |
| Weight | Kgs. | 1000 | 1400 | 1800 | 2500 | |
Accessories for Screw Type Dry Vacuum Pumping System
Vacuum System Electro Pneumatic Butterfly Isolation
Make : Marck/aira [Cair]
Type : Electro Pneumatic Butterfly Valve
MOC : SS 304/SS 316/Carbon Steel
Lining : PTFE [Optional]
Operation : Electro pneumatic
Working Pressure : 5-7 Kg/Cm2
Solenoid Valve Coil : Flame Proof
Supply Voltage : 230 V Ac. Single Phase, 50 Hz
Vacuum Switch with Digital Display
Make : Taie
Range : 760 to 0.1 torr
Sensor : Vacuum Transducer
Location : At Booster Suction
Enclosure : Flame Proof
Wetted Parts : SS 304
Temperature Switch with Digital Display
Make : Taie
Range : 0 to 100 Deg. C
Sensor : RTD [PT100] Sensor
Location : At Booster Discharge
Enclosure : Flame Proof
Wetted Parts : SS 304
Rinsing Vessel
A 10 Ltrs Tank is provided for periodic flushing of the Pump. Recommended Solvent is flushed for a short period on a cyclic basis. Timer with solenoid valve provided for regulating the flushing procedure.
Solenoid Valve : Flame Proof
Electrical Rating : 230 V Ac, 1 Ph, 50 Hz
Rinsing Vessal : 10 Ltrs.
MOC : SS 304
N2 Purging System
The N2 Purging / Flushing Unit is provided for flushing of the Pump. The flushed for a short period at the time of on & off of the Screw Type Dry Vacuum Pump. Timer with solenoid valve provided for regulating the flushing procedure.
Solenoid Valve : Flame Proof
Electrical Rating : 230 V Ac, 1 Ph, 50 Hz
Pressure Regulator : for N2
Rota meter / Flow Meter : 0 to 50 LPM
Electrical Control Panel – Flame Proof / Non Flame Proof
Contactors and relays for the pumps, Vacuum pumping unit ON/OFF Switch, Mains Indicating and pump operating Indication Lamps with overload indications & Variable Frequency Drive.
Optional : Relay logic / PLC / HMI